Kawasaki KZ Regulator Rectifier

Fits the following models:
1976 KZ900A4/B1 LTD
1977-1978 KZ1000A1/A2
1977-1980 KZ1000B LTD
1980 KZ1000G Z1 Classic
1981-1982 KZ1000J
1981-1982 KZ1000K LTD
1981-1982 KZ1000M CSR
1982 KZ1000R Eddie Lawson
1981-1982 KZ1100A Shaft
1981 KZ1100B GPz
1982 KZ1100D Spectre
1979-1982 KZ1300A/B
Bolt-on replacement for the stock regulator & rectifier.
Solves the problem of overcharging batteries.
THIS UNIT REPLACES BOTH THE REGULATOR AND RECTIFIER WITH ONE COMPONENT
Replaces OEM part 21066-024.

Simple to install - NO CUTTING OR SPLICING OF WIRES.
• Remove the existing regulator & rectifier.
• Bolt this new unit under the battery box, in the place of the old regulator.
• Plug the green connector into the green connector of the electrical panel.
• The ground wire connects to the engine ground point behind the kickstarter.
• The two wires normally going to the rectifier connect into the double female connector on the new unit.